Kingston 32GB, DDR4, 2666MHz (PC4-21300), CL19, SODIMM Memory

£137.54

25 in stock

SKU: KVR26S19D8/32 Categories: ,
 
ValueRAM's KVR26S19D8/32 is a 4G x 64-bit (32GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers.
  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP = 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Dual-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.18” (30.00mm)
  • RoHS Compliant and Halogen-Free

Description

Specification

  • Series: Kingston ValueRAM
  • DDR Type: SODIMM DDR4
  • Size: 1 x 32GB
  • #Hide#Individual Module Size: 32GB
  • Speed: 2666 MHz
  • Compliance: PC4-21300
  • Pins: 260-pin
  • CAS Latency: 19-19-19
  • Data Integrity Check: Non-ECC
  • Voltage: 1.2V
  • Additional Information: See Overview
  • Package Type: Retail
  • Package Weight: 0.0225 kg
  • Warranty: Lifetime
Weight0.0225 kg
Series

Kingston ValueRAM

DDR Type

SODIMM DDR4

Size

1 x 32GB

Individual Module Size

32GB

Speed

2666 MHz

Compliance

PC4-21300

Pins

260-pin

CAS Latency

19-19-19

Data Integrity Check

Non-ECC

Voltage

1.2V

Additional Information

See Overview

Package Type

Retail

Package Weight

0.0225 kg

Warranty

Lifetime

Brand

KINGSTON

Reviews

There are no reviews yet.

Be the first to review “Kingston 32GB, DDR4, 2666MHz (PC4-21300), CL19, SODIMM Memory”

Your email address will not be published. Required fields are marked *